亚洲成人精品在线免费,日本一区二区不卡网站,精品69视频一区二区三区网站,性色α√人人爽人澡人人妻蜜臀

stacker cylinder Sold to Spain

Release time:2023-12-08 14:41:32 Hits:126 Current position: Home > News

This article mainly introduces:

Spain hydraulic cylinder,stacker cylinder manufacturer,stacker cylinder

Spain stacker cylinder

(Spain stacker cylinder,produced by Hebei Hengyu company)

stacker cylinder are widely used in Spain,because of no transmission clearance,powerful torque,clever hydraulic energy conversion.So our company has designed stacker cylinder for customers from Spain.

Introduction to stacker cylinder:

The viscosity of the working oil used in the stacker cylinder is 29~74mm2/S, and ISO VG46 anti-wear hydraulic oil is recommended. Working oil temperature within the range of -20~80. C. When the ambient temperature and service temperature are low, the oil with lower viscosity can be selected.

The piston rod of the stacker cylinder has two kinds of solid rod and hollow rod, and one end of the hollow piston rod needs to be set aside for welding and heat treatment. The solid piston rod material is 35, 45 steel, and the hollow piston rod material is 35, 45 seamless steel pipe. After rough machining, the piston rod is conditioned to 229~285HB in India, and if necessary, the hardness is 45~55HRC after high-frequency quenching.

stacker cylinder piston rod material introduction: In general, we use 45 steel to produce stacker cylinder piston rod. It has a large impact force when it is used, and some good performance steel are also used in the heavy load transmission. In order to have enough work intensity when using, and can ensure normal use, this is still more critical to have a detailed understanding of the material.

stacker cylinder to reasonable use of hydraulic oil: strict hydraulic oil selection off. Hydraulic oil is selected in strict accordance with oil standards. The selection of good quality hydraulic oil can effectively prevent bubbles in the working process of the hydraulic system. When choosing the oil, it should be selected according to the lowest temperature in different regions, and fill the hydraulic oil according to the dipstick standard, and at the same time, it should also keep the hydraulic system clean (when filling the hydraulic oil, it should prevent the water and other impurities into it), and often check the oil quality, oil level and oil color of the hydraulic oil. If blisters and bubbles are found in the hydraulic oil. When the oil becomes milky white, the source of the air in the oil should be carefully found and eliminated in time.

Answers to some questions about stacker cylinder:

What components can control cylinder rising and falling speed and the speed is adjustable?
A throttle or special solenoid valve is required. The reversing valve can choose the three-position reversing valve with P-type middle function. When rising, the reversing valve can be changed to the middle position to achieve differential connection and the fastest speed. Add a combination valve one-way throttle valve in the oil return circuit, connection mode: when the cylinder rises, the oil flows back to the tank through the check valve, the throttle valve is reversed off, when the cylinder falls, the reversing valve is changed to the left or right position (see the structure of the valve), the check valve is reversed off, the oil returns to the tank through the throttle valve, and the speed can be adjusted through the throttle valve.

Why does the hydraulic cylinder rebound after the rod cavity is extended into place?
The reason is that after the rod cavity is extended into place, the rod cavity and the rodless cavity are connected, so that the cylinder moves towards the rod cavity. After connecting, it is equivalent to the hydraulic oil directly driving the cylinder with an area equal to the piston rod. After the end of this problem, it is estimated that the seal is not very good, and the two cavities are connected after the pressure is increased to a certain extent; Or there is a problem in the valve, so that the two chambers are connected after reaching a certain pressure. Other phenomena: If the load is increased to a certain extent, no matter which side of the solenoid valve is energized, the cylinder will move to the rod cavity.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
色老头av亚洲三区三区| 国产无码久久久久久| 淫荡淫水逼操烂视频| 高颜值情侣鸡巴插插淫叫| 小骚货舔小骚逼视频| 大鸡巴插入骚穴在线观看| 欧美另类在线观看| 国产女明星一级毛片| 中文字幕国产精品一区二区三区| 精品国产自在久国产应用| 免费男人和女人黄片| 巨屌抽插舔阴视频| 大吊肏子宫在线观看| 爱爱视频小抽插动漫| 狂插美女大屁股在线观看| avtt天堂网先锋伦理| 国产乱理伦片在线观看夜| 黑丝美女被操哭边操边尿| 好舒服好大好粗视频| 奇米一区二区三区视频在线观看| 俩男人插下面的视频| 国产日韩一区二区三区在线播放| 亚洲综合区欧美一区二区| 欧美人与动人物A级| 操我好舒服用力视频| 久久久精品欧美一区二区三免费| 蜜桃av噜噜一区二区三区免费| 国产羞羞的视频在线观看| 男人扒开女人腿狂躁免费| 中国三级片在线视频| 老湿机69福免费破解版| 99视频在线看免费视频| 我想看操小嫩逼大片| 大几吧插进小穴视频| 丝袜片一区二区三区四区五区| 骚逼被狂插视频教程| 亚洲 欧美 日韩 主播| 日本中文字幕无人区一区二区| 欧美成人精品一区二区免费看| 欧美高清在线观看一区二区三区| 日本人色频在线看观|