This article mainly introduces:

Burma hydraulic cylinder,tension cylinder manufacturer,tension cylinder

(Burma tension cylinder,produced by Hebei Hengyu company）

tension cylinder are widely used in Burma，because of no transmission clearance，powerful torque，clever hydraulic energy conversion.So our company has designed tension cylinder for customers from Burma.

Introduction to tension cylinder:

Repair method of small range wear of oil tension cylinder: 1. Use oxygen-acetylene flame to bake the scratched part (master the temperature, avoid surface annealing), bake the oil on the metal surface all the year round until no sparks splash; 2. The scratched part is treated with an Angle grinder, the grinding depth is more than 1 mm, and the groove is polished along the guide rail, preferably a dovetail groove. Scratch both ends of the drilling deeper, change the force situation; 3. Clean the surface with absorbent cotton dipped in acetone or anhydrous ethanol.

Do not regularly check the damage of the chrome layer of the tension cylinder: completely extend the tension cylinder and carefully check whether there is any surface damage such as injury, strain, welding slag, such as the surface damage position, in the tension cylinder block < 20cm, and the damage depth < 5mm, should be repaired in time to prevent long-term damage to the tension cylinder seal. Welding slag is strictly prohibited on the surface of the tension cylinder.

When the tension cylinder is disassembled due to oil leakage and other faults, the position of the piston should be moved to any end position of the tension cylinder by applying liquid pressure. Improper tapping and sudden drop should be avoided during disassembly.

At the rated pressure, the thrust of the tension cylinder is determined by what factors: at the rated pressure of the oil pump, the work done by the tension cylinder is related to the diameter of the tension cylinder, but not to the stroke of the tension cylinder. Moreover, the larger the tension cylinder diameter, the larger the area, and the greater the pressure obtained. To this point, we should have a correct understanding and clear understanding, so as to avoid problems in the use of the tension cylinder.

Answers to some questions about tension cylinder:

What parameters do I need to provide when purchasing hydraulic cylinders?
The main technical parameters of the hydraulic cylinder: 1. Cylinder diameter; Cylinder diameter, inner diameter size; 2. Piston rod diameter; 3. Cylinder stroke; 4. Cylinder pressure; The working pressure of the cylinder is often calculated using the test pressure, which is less than 16MPa multiplied by 1.5 and higher than 16 multiplied by 1.255. Import and export diameter and thread parameters; 6. Whether there is buffer; According to the working conditions, the piston rod extension contraction is generally buffered if the impact is large. 7. Installation method of oil cylinder, etc.

How many kilograms can the 63 cylinder hold?
The force of the cylinder is related to the cylinder diameter and pressure. 63 cylinder diameter (cylinder inner circle diameter), 21MPA pressure, thrust 6 tons.