亚洲成人精品在线免费,日本一区二区不卡网站,精品69视频一区二区三区网站,性色α√人人爽人澡人人妻蜜臀

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

sanitation truck hydraulic cylinder Sold to Japan

Release time:2023-11-10 08:35:09 Hits: Current position: Home > News

This article mainly introduces:

Japan hydraulic cylinder,sanitation truck hydraulic cylinder manufacturer,sanitation truck hydraulic cylinder

Japan sanitation truck hydraulic cylinder

(Japan sanitation truck hydraulic cylinder,produced by Hengyu Group)

sanitation truck hydraulic cylinder are widely used in Japan,because of clever hydraulic energy conversion,simple structure and reliable operation,excellent temperature resistance.So our company has designed sanitation truck hydraulic cylinder for customers from Japan.

Introduction to sanitation truck hydraulic cylinder:

The material of the sliding part of the sanitation truck hydraulic cylinder piston sintered casting piston will cause sintering phenomenon when subjected to large transverse load. In this case, the sliding part of the piston should be made of copper alloy or welded to such material.

In use, the sanitation truck hydraulic cylinder should try to avoid the friction iron powder or iron filings formed by buffering the plunger. When the matching gap of the buffer device is small and the transverse load on the piston rod is large, the sintering phenomenon may be caused. These friction iron powder or the metal fragments that have fallen off as a result of sintering will remain in the sanitation truck hydraulic cylinder.

When the sanitation truck hydraulic cylinder needs to be stored for a period of time, please follow the recommended methods: The sanitation truck hydraulic cylinder should be stored in a dry, clean, non-corrosive gas indoor environment, pay attention to protect the sanitation truck hydraulic cylinder from internal corrosion and external damage. If the indoor requirements cannot be met, the hardened and well-drained ground should be cushioned at least 30cm, and the upper part should be covered with waterproof storage. The oil sanitation truck hydraulic cylinder should not be in direct contact with water vapor for a long time. The sanitation truck hydraulic cylinder should be placed as vertically as possible with the piston rod facing up, which minimizes corrosion due to possible condensation in the sanitation truck hydraulic cylinder and permanent deformation of the seal due to the piston and rod weight. (When the shield is stored in the shield machine, the support shoe is placed upward). Keep the oil port protective cover until the pipe is connected. For long-term storage, the protection should be added on both sides of the piston of the sanitation truck hydraulic cylinder Before working, the sanitation truck hydraulic cylinder must be run repeatedly with low pressure (greater than the starting pressure) to discharge the air in the sanitation truck hydraulic cylinder before normal work. The oil inlet and outlet and the joint must be tightly fastened with a combination pad to prevent oil leakage.

The daily inspection of the sanitation truck hydraulic cylinder includes: checking the connection of the sanitation truck hydraulic cylinder and the pipe joint for leaks. Check the sanitation truck hydraulic cylinder rod for leaks. Check the sanitation truck hydraulic cylinder connection for leaks. When the sanitation truck hydraulic cylinder moves, the work is normal and smooth. Whether the sanitation truck hydraulic cylinder has internal leakage.

Answers to some questions about sanitation truck hydraulic cylinder:

How to calculate the tonnage of the hydraulic press without konowing the diameter of the cylinder?
To know the tonnage of the hydraulic cylinder, you first need to know the working pressure of the hydraulic system, the inner diameter of the hydraulic cylinder and the outer diameter of the cylinder rod (the outer diameter of the cylinder rod is needed when calculating the hydraulic cylinder tension). The thrust of the hydraulic cylinder (that is, the force that the hydraulic cylinder can produce by extending out) = the cross-sectional area of the hydraulic cylinder (or the cross-sectional area of the piston) × the working pressure of the cylinder (the cross-sectional area of the piston) =pi*D^2/4= PI (take 3.14) × the square of the cross-sectional area of the piston ÷4 working pressure to see the pressure displayed on the pressure gauge when the maximum load is working.

There are four cylinders in the front top of the dump truck. When the second cylinder is lifted to half the height, it suddenly falls back more than 30 cm or so, and the cylinder continues to lift.
The problem is the cylinder, the second section of the different strength of the heart. When the oil supply resistance is small, the first out, when the power is not moving, the cylinder needs to be strong, because the second section needs to pop it out after a while when the pressure is large, the oil can not keep up, so it falls back, and the oil continues to keep up.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
国产熟女视频一区二区三区| 看人妻仑乱A级毛片| 亚洲综合区欧美一区二区| 无码一区二区三区色哟哟| 挺进绝色邻居的紧窄小肉| 亚洲综合一区国产精品| 国产精品无码一二区免费| 成人久久久久久蜜桃免费| 大香蕉尹人97超级视频| 欧美va精品亚洲va精品| 中文字幕你懂的av一区二区| 一级特一黄大片欧美久久| 免费国产香蕉视频在线观看| 国产一区曰韩二区欧美三区| 国产一二三四五自产| 色噜噜噜噜一区二区三区| 亚洲国产综合精品 在线 一区| 美女穿黑丝被大鸡巴猛操| 久久久精品国产乱码内射| 日本高清一区二区三区在线观看| 久久精品国产亚洲高清| 中日韩国内精品视频| 一区二区三区亚洲av| 偷窥国内肥臀老熟女视频| 中文字幕在线观一二三区| 欧美高清一二三区| 视频在线观看一区@99| 美女的粉嫩小逼视频特写| 白嫩在线亚洲观看| 91热国产在线观看| 爆操大奶骚货视频| 国产精品一区二区三区涩涩av| 女同舔我下面直流水| 亚洲av伦理一区二区三区久久| 一级e片在线观看| 中文字幕亚洲精品女同一页| 日本十八禁大骚逼| 大黑屌后入骚妇屁股| 粉嫩小穴被大鸡巴操视频在线观看| 最新的亚洲欧美中文字幕| 大香蕉尹人97超级视频|