This article mainly introduces:

Korea hydraulic cylinder,tension cylinder manufacturer,tension cylinder

(Korea tension cylinder,produced by Hengyu Hydraulic Cylinder Factory）

tension cylinder are widely used in Korea，because of long service life，smooth movement，high work efficiency.So our company has designed tension cylinder for customers from Korea.

Introduction to tension cylinder:

tension cylinder diameter, rod diameter, stroke determination: Choose national standards or other standards tension cylinder, avoid the selection of non-standard size, otherwise the difficulty of processing and manufacturing costs will be increased. The length of the tension cylinder guide is determined by the length of the stroke. Check the strength of tension cylinder, piston rod, screw, etc. according to the working pressure or load. At the same time, working pressure, ambient temperature, working medium and running speed are also the key to selecting seals.

The tension cylinder should be avoided for a long time without use, if it is indeed idle for a long time for some reason, it should also be regularly turned on for empty operation, so that its parts can be fully lubricated, so as to avoid rust on the working surface and affect the normal work in the future. (If it cannot be turned on and run, a small amount of lubricating oil can be applied on its outer surface for protection) ' The use of the tension cylinder should pay attention to: the operation should be as far away from the tension cylinder as possible, to avoid falling objects, knocking, rubbing the tension cylinder coating. When cleaning the tension cylinder, only use soft materials (such as cotton) to wipe, and do not scratch high-hardness materials. Do not use the tension cylinder when the oil temperature exceeds 70 ° C.

The tension cylinder should be used correctly and maintained regularly. The tension cylinder should be deflated before use, the buffer regulating valve should be adjusted to a reasonable position, the cleanliness of the oil should be checked regularly, the dust on the tension cylinder should be cleaned regularly, and attention should be paid to waterproof and fireproof.

The meaning of the tension cylinder model marked by the tension cylinder manufacturer: for example, 160/100-1150, its meaning: from a professional point of view, 160 refers to the tension cylinder diameter, which is 160mm, and the 100 behind refers to the rod diameter, which is 100mm. The 1150 refers to the tension cylinder stroke, which is 1150mm. Therefore, on this point, we should have a correct understanding and can not make mistakes.

Answers to some questions about tension cylinder:

What is a two-way hydraulic cylinder?
Bidirectional hydraulic cylinder definition: The bidirectional hydraulic cylinder uses the oil as the working medium, transmits the movement through the change of the sealing volume, and transmits the power through the pressure inside the oil. The two-way cylinder has at least two oil ports, which are used to connect the hydraulic tubing, and control the extension and retraction of the cylinder by pressing.

What is the smallest cylinder size?
The smallest shape cylinder I have ever seen is a hydraulic clamping cylinder in the machine tool industry. Outer diameter 24 mm, total length 23 mm, travel 4 mm. Weighs 0.05 kg. Maximum clamping force 3500 Newtons.