This article mainly introduces:

Ghana hydraulic cylinder,servo cylinder manufacturer,servo cylinder

(Ghana servo cylinder,produced by Hengyu Hydraulic Cylinder Factory）

servo cylinder are widely used in Ghana，because of long service life，smooth movement，high work efficiency.So our company has designed servo cylinder for customers from Ghana.

Introduction to servo cylinder:

The material of the sliding part of the servo cylinder piston sintered casting piston will cause sintering phenomenon when subjected to large transverse load. In this case, the sliding part of the piston should be made of copper alloy or welded to such material.

The definition of the minimum starting pressure of the servo cylinder refers to the minimum working pressure of the servo cylinder in the no-load state, which is a comprehensive index reflecting the manufacturing and assembly accuracy of the servo cylinder parts and the size of the sealing friction.

The "O" ring can be used as an auxiliary seal inside the servo cylinder, and the elastic force of the "O" ring makes the sealing slip ring close to the sealing surface, generating sealing pressure to achieve sealing. When the internal hydraulic pressure increases, the "O" ring will further deform and squeeze the slip ring, thereby increasing the sealing pressure and improving the sealing performance. The structure has the characteristics of low friction coefficient, good wear resistance, automatic compensation for wear and absorption of hard particles in the servo cylinder, and can be completely sealed.

The role of the servo cylinder in the mold industry: the servo cylinder has a variety of uses in the mold, one is that the core distance is very large, or because of the mechanism of the product, only the servo cylinder is reasonable or more cost saving. Let the side core be extracted before opening the mold. Hot runner is mainly based on the product to decide, sometimes customers require the use of hot runner, the price is more expensive, but there are many benefits, you can save raw materials, shorten the molding cycle The servo cylinder has an irreplaceable role in the heavy industry production process: it is mainly used in places that need to support heavy objects for a long time, and it can still support heavy objects when the oil pressure is removed, and it is safe and reliable. Can be used underwater, single action, load reversion, nut self-locking to make the load safer, especially in large projects, is easy to operate control and self-locking jack, designed with a safety pressure retaining device, built-in pressure relief valve to prevent overload, to protect the self-locking jack to facilitate safe operation. The connection of the device is connected by high pressure hose and threaded joint, which has the advantages of fast use and overcoming the shortcomings of fast traditional joint oil leakage. It is mainly used for equipment installation and toppling operation in various industries such as electric power, construction, machinery manufacturing, mining, railway bridge, shipbuilding and so on.

Answers to some questions about servo cylinder:

How to calculate hydraulic cylinder flow?
Effective area of the cylinder x stroke = volume usually in liters. Volume/estimated total travel time (converted to minutes) = oil flow rate.

What is the cylinder with rod cavity, what is the rodless cavity.
The rod cavity is the end of the piston rod, the rodless cavity is the end without the piston rod.