亚洲成人精品在线免费,日本一区二区不卡网站,精品69视频一区二区三区网站,性色α√人人爽人澡人人妻蜜臀

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

stroke adjustable cylinder Sold to Germany

Release time:2023-11-23 08:22:52 Hits: Current position: Home > News

This article mainly introduces:

Germany hydraulic cylinder,stroke adjustable cylinder manufacturer,stroke adjustable cylinder

Germany stroke adjustable cylinder

(Germany stroke adjustable cylinder,produced by Hengyu Group)

stroke adjustable cylinder are widely used in Germany,because of clever hydraulic energy conversion,simple structure and reliable operation,excellent temperature resistance.So our company has designed stroke adjustable cylinder for customers from Germany.

Introduction to stroke adjustable cylinder:

The daily inspection of the stroke adjustable cylinder includes: checking the connection of the stroke adjustable cylinder and the pipe joint for leaks. Check the stroke adjustable cylinder rod for leaks. Check the stroke adjustable cylinder connection for leaks. When the stroke adjustable cylinder moves, the work is normal and smooth. Whether the stroke adjustable cylinder has internal leakage.

When the long-stroke stroke adjustable cylinder rotates horizontally, the piston rod bends due to its own weight, causing the guide sleeve and piston to produce biased load, resulting in stroke adjustable cylinder head seal damage, oil leakage, and piston sleep in the stroke adjustable cylinder. The following measures can be taken: increase the piston plan to adjust the piston outer circle and process it into a convex drum, so that the piston can self-position, improve the force situation, and reduce and avoid pulling the stroke adjustable cylinder; The piston and the piston rod are connected with a spherical joint.

The stroke adjustable cylinder is mainly composed of body, piston, piston rod, stroke adjustable cylinder head, stroke adjustable cylinder bottom, piston rod head and related auxiliary devices. The piston divides the stroke adjustable cylinder into two chambers, and moves reciprocally in the stroke adjustable cylinder with the help of pressure oil. In order to improve its working effect, there is no sealing ring on the piston to eliminate internal leakage, where the piston rod passes through the stroke adjustable cylinder head, due to the existence of the gap, it is easy to produce external leakage phenomenon, and the dust can enter the stroke adjustable cylinder through the gap, so the sealing device and dust prevention reason are set. At the same time, in order to eliminate the influence of eccentric load on the work of the piston, all the stroke adjustable cylinders must be provided with a considerable length of guide sleeve at the extended end of the piston rod. In addition, in the case of faster piston movement, the phenomenon of mechanical collision between the piston and the stroke adjustable cylinder bottom and the stroke adjustable cylinder head is serious, so the buffer deceleration should be set at both ends of the stroke adjustable cylinder The working medium of the stroke adjustable cylinder: because it works at room temperature, the ordinary oil-type hydraulic oil can be selected; stroke adjustable cylinder sealing device: The use of Yx sealing ring, polyurethane (PU) and polytetrafluoroethylene (PTFE) materials combined to achieve a good sealing effect; Buffer mechanism of the stroke adjustable cylinder: The buffer structure of the stroke adjustable cylinder is to prevent the piston from colliding with the stroke adjustable cylinder head at the end of the stroke.

The stroke adjustable cylinder requires that the filtration accuracy of the system is not less than the 80um, and the oil pollution should be strictly controlled, the oil should be kept clean, the performance of the oil should be checked regularly, and the necessary fine filtration and replacement of new working oil should be carried out.

Answers to some questions about stroke adjustable cylinder:

Is there a national standard for the testing of hydraulic cylinders?
Generally speaking, the cylinder test is carried out according to JB/JQ20302 Allowable leakage of cylinder in pre-factory leakage test. GB2879 hydraulic cylinder piston and piston rod dynamic seal groove type, size and tolerance. GB6578 hydraulic cylinder piston rod dust ring groove type, size and tolerance. GB7938 hydraulic cylinder and cylinder nominal pressure series, etc.

How to deal with hydraulic cylinder inner wall rag, local wear serious or corrosion?
It can be reparied if the inner wall of the hydraulic cylinder is frayed, local wear or corrosion. We can use the inner wall cold melting copper technology, it has the following advantages: first, the temperature is low, the operating temperature is less than 180 degrees, and the heat affected zone is small. Second: high hardness is up to Brinell hardness 280, wear resistance and anti-corrosion. Third: the process is mature, some large coal mills have been repaired with this method and the effect is remarkable.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
一区二区三区四区欧美日韩亚洲| 日韩精品一区二区亚洲v欧美v日韩| 欧美日韩一级片在线| 91精品国自产在线播放| 欧美一级大片免费观看视频| 久久久久久久久久福利高潮| 国产精品日韩主播无套| 一级国产一级日韩一级欧美| 欧美老熟妇乱人伦人妻| 在线国产精品一区二区三区| 欧美日韩精品免费一级| 亚洲一区二区三区中文字幕手机在线| 国产精品一区二区30p| 国产精品国产三级av| 国产精品观看不卡视频| 日本日本乱码伦视频免费| 中文字幕日本一区二区在线观看| 亚洲中文字幕av一区| 国偷自产av一区二区三区| 国产av一区最新精品麻豆| 久久久久久久久久久午夜福利| 中文字幕亚洲一区巨区| 欧美日韩专区一区二区| 亚洲男人天堂成人网| 欧美日韩精品一区丁香| 午夜精品久久久久久99| 国产精品久久久久粉嫩小| 久久久久成人精品免费播放寂寞少妇| 亚洲av乱码一区二区三区女| 狠狠色噜噜狠狠亚洲AV| 日韩欧美一区中文字幕在线| 日韩专区精品无码资源首页| 国产精品久久久久久妇女| 久久综合视频三级黄片| 日本淫片一区二区三区| 日本一区二区三区中文字幕八戒视频| 色欲aⅴ亚洲情无码AV蜜桃| 国产精品女同久久久久久| 中文精品久久久久国产网址| 欧美日韩精品免费一级| 欧洲日韩在线观看一区二区三区视频|