亚洲成人精品在线免费,日本一区二区不卡网站,精品69视频一区二区三区网站,性色α√人人爽人澡人人妻蜜臀

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

track steering cylinder Sold to Congo

Release time:2023-11-13 11:19:37 Hits: Current position: Home > News

This article mainly introduces:

Congo hydraulic cylinder,track steering cylinder manufacturer,track steering cylinder

Congo track steering cylinder

(Congo track steering cylinder,produced by Hengyu Hydraulic Co., Ltd)

track steering cylinder are widely used in Congo,because of no need for deceleration device,long service life,smooth movement.So our company has designed track steering cylinder for customers from Congo.

Introduction to track steering cylinder:

1, the hydraulic machinery should be kept clean, in order to prevent dust and debris from falling into the oil, the tank should be sealed. 2, the oil in the tank should be replaced regularly according to the working condition. When changing the oil, the dirt and impurities accumulated at the bottom of the tank should be removed and the tank should be cleaned. 3, hydraulic oil, oil drums should be set in a clean and safe place to strengthen management. The oil drum, oil filter, oil funnel, oil pipe, etc. used should be kept clean. The oil drums for loading hydraulic oil must be cleaned in advance, and the oil drums should be dedicated and not mixed with other oil drums.

The viscosity of the working oil used in the track steering cylinder is 29~74mm2/S, and ISO VG46 anti-wear hydraulic oil is recommended. Working oil temperature within the range of -20~80. C. When the ambient temperature and service temperature are low, the oil with lower viscosity can be selected.

If the track steering cylinder piston rod is found to be worn, it can be brushed and plated first, then ground, and finally adjust the mating accuracy of the piston rod and the guide sleeve. At this time, the guide sleeve can be properly redrilled or the guide sleeve can be re-turned. When making the above repairs, remember to replace various rubber seals in time.

track steering cylinders in series, parallel and series parallel. Series: In the track steering cylinder, the oil inlet of the subsequent reversing valve is the supply of the previous oil return, and there is no separate oil return circuit connected with the oil return in each valve. Series: In the track steering cylinder, the oil inlet of the subsequent reversing valve is the supply of the previous oil return, and there is no separate oil return circuit connected with the oil return in each valve. Parallel: the pressure oil in the track steering cylinder is connected with the inlet oil of each reversing valve, and the return oil is collected by the return oil circuit. Series parallel: For this one, compared with the simple series and parallel, it is slightly more complicated, but it is not impossible to understand. The series refers to the oil in the track steering cylinder, which is in series form, but can not form a series circuit, and the parallel refers to the oil return circuit of each valve, which is in parallel.

Answers to some questions about track steering cylinder:

Is it normal for the cylinder to turn black?
Cylinder blackening is a soft fault: 1. It does not affect the normal operation of your equipment. 2. Cylinder blackening involves a lot of things: hydraulic oil, oil seal material, piston rod coating, etc. These three things are not determined by the manufacturer because these three things are provided by other manufacturers. If the equipment is not due to high temperature caused by the black cylinder, you do not have to worry too much because your excavator can still work normally. If you feel uncomfortable, you can choose to replace the cylinder or replace the hydraulic oil.

Does the sealing string of the upper and lower chamber of the hydraulic cylinder fall by itself?
It is possible, the probability accounts for 85% (depending on the weight), the weight is less than the system resistance, may not fall, the weight is greater than the system resistance, will not necessarily fall, so often check the equipment, safety first, find the problem in time to solve, the cylinder is not very expensive parts, maintenance does not cost much money, However, accidents caused by cylinder failure will lose several times the cost.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
阴茎大头插少妇蜜穴视频| 中日美女毛5片一区二区三区| 日韩美女叉B视频| 夫妻性生活视频在线直播| 亚洲日韩国产欧美久久久| 插插插插插插插插插插插| 正在播放舔穴视频| 大鸡巴操逼视频免费| 白丝袜子宫啊啊啊不要了| 97性无码区免费| 操批在线观看视频| 大胸瑟瑟黑丝午夜| 强伦人妻一区二区三区视频18| 中文字幕在线观一区二区| 男人透女人视频短篇| 欧美精品视频在线| 亚洲一区二区三区精品日韩| 一区二中文字幕在线看国产一区| 强奷很舒服好爽好爽| 女人被大鸡吧操逼| 看女生b免费视频| 2021国产精品自在自线| 久久精品国产亚洲高清| 国产精品538一区二区在线| 三级成人国产高清视频| 骚逼毛茸茸乱伦视频| 非洲男生操男生屁眼视频| 美国业余自由摘花管| 久久久久久高清无码视频| 99亚洲精品高清一二区| 两人爽爽爽无码免费视频| 色噜噜人妻丝袜中文字幕| 中文字幕在线精品的视频| 麻豆视频一级片在线观看| 大鸡巴插美女小逼逼| 久久丁香花五月天色婷婷| 日韩视频无码日韩视频又2020| 波多野吉衣一区在线观看| 国产高清第一区第二区第一页| 亚洲精品影片一区二区三区| 大狼狗插阴道视频|