亚洲成人精品在线免费,日本一区二区不卡网站,精品69视频一区二区三区网站,性色α√人人爽人澡人人妻蜜臀

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

hsgk cylinder Sold to Greece

Release time:2023-11-12 15:33:41 Hits: Current position: Home > News

This article mainly introduces:

Greece hydraulic cylinder,hsgk cylinder manufacturer,hsgk cylinder

Greece hsgk cylinder

(Greece hsgk cylinder,produced by Hebei Hengyu company)

hsgk cylinder are widely used in Greece,because of powerful torque,clever hydraulic energy conversion,simple structure and reliable operation.So our company has designed hsgk cylinder for customers from Greece.

Introduction to hsgk cylinder:

hsgk cylinder buffer valve inspection and maintenance: For the valve buffer hsgk cylinder, the focus should be on checking the wear of the buffer valve spool and seat. Once it is found that the amount of wear increases and the seal fails, it should be replaced. It can also be repaired by using abrasive spool and seat matching grinding method.

If the seal of the hsgk cylinder is softened and sticky, it may be that the seal is incompatible with the hydraulic oil or the nearby lubricating oil, replace the appropriate seal; If the seal becomes hard and loses elasticity, most of it is because the ambient temperature is too high (more than 80 ° C), make appropriate temperature insulation protection or replace the high temperature seal.

The quality of the hsgk cylinder can not be ignored in the purchase of the hsgk cylinder. The hsgk cylinder is the main component of the hsgk cylinder, the single pillar for mining, the hydraulic support, the gun tube and other products, and its processing quality directly affects the life and reliability of the entire product. hsgk cylinder processing requirements are high, its internal surface roughness requirements are Ra0.4 ~ 0.8μm, the coaxiality, wear resistance requirements are strict. The basic feature of hsgk cylinder is deep hole processing, which has always troubled the processing personnel.

The cavitation of the hsgk cylinder has a great influence, and to avoid it, it is necessary to use the hydraulic oil reasonably and ensure the quality of the hydraulic oil. If the anti-foam property of the oil is poor, it is easy to produce foam, resulting in cavitation. Secondly, the change frequency of oil pressure is too fast and too high, which will also directly cause the formation of bubbles and accelerate the rupture rate of bubbles. The test shows that the speed of cavitation will be accelerated in the part with high frequency of pressure change. For example, at the inlet and outlet of the hsgk cylinder, due to the relatively high frequency of pressure changes, the degree of cavitation is also relatively higher than that of other parts. In addition, overheating of the oil will also increase the probability of cavitation.

Answers to some questions about hsgk cylinder:

How to take out the diaphragm of hydraulic cylinder? The septum ring is also known as the septum sleeve, when the cylinder is too long, and does not need too much travel, add the septum sleeve, limit the stroke of the hydraulic cylinder, set on the piston rod, only contact with the guide sleeve and piston, do not cooperate with the cylinder, limit the stroke, take out the difficulty is different, need to have such a professional tool, before taking out to consult the manufacturer.

Why does the hydraulic cylinder ring?
1 Air intrusion into the hydraulic system is the main reason for noise 2 The relief valve is unstable, such as due to the improper combination of the slide valve and the valve hole or the contact of the cone valve and the seat is stuck by dirt, the damping hole is blocked, the spring is crooked or fails to make the spool stuck or move in the valve hole, causing system pressure fluctuation and noise. 3 Improper adjustment of the reversing valve causes the spool of the reversing valve to move too fast, resulting in reversing impact, resulting in noise and vibration. 4 Mechanical vibration, such as long tubing, elbow more and not fixed, when the oil flow through, especially when the flow rate is high, easy to cause pipe shaking; The rotating part of the motor and hydraulic pump is unbalanced, or the alignment is not good during installation, or the coupling is loose, etc., which can produce vibration and noise.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
白虎美女被大基吧操| 久久99热东京热亲亲热| 国产免费无码一区二区视频无码| 大胸美女被c的嗷嗷叫视频| 女女同性女同1区二区三| 国产亚洲欧美中文日韩| 九九在线视频热线视频精选| 91啪国线自产2019| 欧美激情在线播放第一页| 99精品一级欧美片免费| 又爽又粗又大又长的爆草| 99国产精品一区二区| 国产成人精品免费视频全| 啊啊啊好疼视频进来| 欧美精品国产一区二区在线观看| 无码中文字幕免费一区二区三区| 一级风流国产片a级| 美女呻吟翘臀后进爆白浆| 日本 视频 一区二区| 操大美女逼射精视频| 好想大鸡巴插进阴道视频| 搞段B片黄色全免费看看| 国产精品一区二区三区在线视| 一区二区三区av精品| 妺妺坐在我腿上下面好湿| 亚洲欧美一区二区三区在| 最新国产亚洲亚洲精品A| 美女被操的流水AV| 日本欧美一区二区三区| 精品一区二区三区乱码中文字幕| 亚洲中文字幕二区不卡| 国产精品无码av在线一区| 亚洲精品国产综合一线久久| 欧美日韩久久久一区二区三区| 亚洲一区二区三区精品日韩| 裸体美女被操的啊啊直叫| 成人av大全免费一区二区三区| 亚洲欧美一区二区三区在| 日本欧美人一区二区三区| 老太太在丛林日老B| 国产精品碰碰现在自|