亚洲成人精品在线免费,日本一区二区不卡网站,精品69视频一区二区三区网站,性色α√人人爽人澡人人妻蜜臀

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

tension cylinder Sold to Kazakhstan

Release time:2023-11-12 15:30:28 Hits: Current position: Home > News

This article mainly introduces:

Kazakhstan hydraulic cylinder,tension cylinder manufacturer,tension cylinder

Kazakhstan tension cylinder

(Kazakhstan tension cylinder,produced by Hengyu Hydraulic Cylinder Factory)

tension cylinder are widely used in Kazakhstan,because of long service life,smooth movement,high work efficiency.So our company has designed tension cylinder for customers from Kazakhstan.

Introduction to tension cylinder:

If the tension cylinder slips or crawls, please check whether there is astringency inside the tension cylinder, because the internal parts of the tension cylinder are improperly assembled, the parts are deformed, worn or the shape and position tolerance is excessive, the action resistance is too large, so that the piston speed of the tension cylinder changes with the different stroke position, and the slip or crawl occurs. Most of the reasons are due to poor assembly quality of parts, surface scars or sintered iron filings, so that the resistance increases, the speed decreases. For example, the piston is different from the piston rod or the piston rod is bent, the tension cylinder or the piston rod is offset from the mounting position of the guide rail, and the sealing ring is too tight or too loose. The solution is to repair or adjust, replace damaged parts and remove iron filings.

The advantages and disadvantages of the tension cylinder: the surface of the tension cylinder by painting, coating protection treatment, bright luster is not easy to rust, all raw materials of the tension cylinder through the top heat treatment, high manufacturing precision, belongs to the precision machinery, has a simple structure, stable quality, high mechanical efficiency, easy to achieve automation and many other advantages. However, hydraulic technology also has the shortcomings of oil leakage, oil temperature change affecting the control of running speed, noise, expensive cost and high maintenance cost.

Before the tension cylinder is removed, the relief valve should be loosened to reduce the pressure of the hydraulic circuit to zero, and then the power supply should be cut off to stop the hydraulic device. After loosening the oil port piping, the oil plug should be applied to plug the oil port.

Before purchasing the tension cylinder, it is necessary to master the original information and design basis, mainly including: the use and working conditions of the machine; The structural characteristics, load conditions, stroke size and operation requirements of the working mechanism; The selected working pressure and flow of the hydraulic system; The reality of materials, fittings and processes; Relevant national standards and technical specifications, etc.

Answers to some questions about tension cylinder:

Can a leak in the cylinder cause the hydraulic system to fail?
Leakage in the cylinder can cause the hydraulic system to fail. Cylinder leakage (internal leakage) first affects the controlled action of the hydraulic system can not meet the requirements (such as the movement speed of the cylinder, the insufficient thrust and tension of the cylinder), if the internal leakage of the cylinder is too large, it may also cause the cylinder to be unable to promote the load movement. Second, the existence of internal leakage (internal leakage) of the oil cylinder will lead to the rapid rise (or too high) of the oil temperature of the hydraulic system, and the high oil temperature will not only waste the energy conversion of the system, but also lead to the reduction of the viscosity of the oil, which will accelerate the aging and destruction of the seals such as pumps, valves, cylinders, pipelines, and at the same time, the lubrication effect of the hydraulic oil is reduced, and the production of iron filings that increase the friction of the hydraulic system.

Why can't the hydraulic cylinder be replaced with water?
Hydraulic oil for hydraulic transmission has a variety of requirements for viscosity, density, flow rate, and temperature, which are not available for water.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
精品无码国产一区二区三区A| 中文字幕av一区二区三区蜜桃| 欧美一级淫片免费播放口| 国产午夜久久精品一区四虎| 男女操逼视频嫩嫩| 成年人的一级黄色带| 欧美 日韩 激情 在线| 大香蕉尹人97超级视频| 欧美精品日韩精品中文字幕| 99久久国产综合精品女| 日本精品久久人妻一区二区三区| 欧美日韩视频在线一区二区| 99久久九九爱精品国产| 欧美亚洲综合久久夜夜嗨| 国产中文字幕在线一区二区三区| 久久久国产精品2020| 美女被操的流水AV| 九九在线精品亚洲国产| 国产午夜精品美女视频露脸| 午夜性福福利视频一区二区三区| 日本潘金莲三级bd高清| 在线免费观看一区| 国产精品视频一区二区三区分享| 成人国产亚洲精品一区二| 亚洲欧美日韩精品一区二区| 久久亚洲精品无码AV宋| 亚洲日韩不卡一区二区三区| 在线看免费无码a片视频| 粉嫩小穴被大鸡巴操视频在线观看| 欧美精品视频在线| 亚洲大尺度无码无码专线一区| 中文字幕在线观一二三区| 在线看免费无码a片视频| 久久99国产中文| 国产一区曰韩二区欧美三区| 一级美女插逼百度| 操世界最美丽的逼片| 中文字幕 av一区二区| 夜夜嗨av少妇一二三区| 成人av大全免费一区二区三区| 日本一区二区三区高潮喷吹|