This article mainly introduces:

Italy hydraulic cylinder,stacker cylinder manufacturer,stacker cylinder

(Italy stacker cylinder,produced by Hengyu Hydraulic Cylinder Factory）

stacker cylinder are widely used in Italy，because of no need for deceleration device，long service life，smooth movement.So our company has designed stacker cylinder for customers from Italy.

Introduction to stacker cylinder:

The stacker cylinder should not be mixed with foreign objects during assembly, which will cause scars. Before the total assembly of the stacker cylinder, all parts must be fully removed and cleaned. When the parts are installed with burrs or dirt, foreign objects are easily embedded into the surface of the stacker cylinder wall due to the stiffness and the weight of the parts, causing scars.

The meaning of the stacker cylinder model marked by the stacker cylinder manufacturer: for example, 160/100-1150, its meaning: from a professional point of view, 160 refers to the stacker cylinder diameter, which is 160mm, and the 100 behind refers to the rod diameter, which is 100mm. The 1150 refers to the stacker cylinder stroke, which is 1150mm. Therefore, on this point, we should have a correct understanding and can not make mistakes.

When the stacker cylinder is disassembled due to oil leakage and other faults, the position of the piston should be moved to any end position of the stacker cylinder by applying liquid pressure. Improper tapping and sudden drop should be avoided during disassembly.

At the rated pressure, the thrust of the stacker cylinder is determined by what factors: at the rated pressure of the oil pump, the work done by the stacker cylinder is related to the diameter of the stacker cylinder, but not to the stroke of the stacker cylinder. Moreover, the larger the stacker cylinder diameter, the larger the area, and the greater the pressure obtained. To this point, we should have a correct understanding and clear understanding, so as to avoid problems in the use of the stacker cylinder.

Answers to some questions about stacker cylinder:

The diameter of the cylinder is 180mm and the pressure is 14mpa. How many tons can the cylinder hold?
Calculate the area of the cylinder, 3.14*9*9=254.34 square centimeters, take the approximate number of engineering, 1 mpa pressure is about 10 kg per square centimeter, 14 mpa pressure is 140 kg per square centimeter, that is 254.34*140=35607.6 kilograms, it can be known that the cylinder can be about 35 tons in theory.

What do cylinder internal leakage and external leakage mean?
Internal leakage means that the piston seal in the cylinder is not strict, there is a leak between the two chambers of the cylinder, the oil is still in the cylinder, and the external leakage is that the oil leaks to the outside of the cylinder.